Green Valley Heating

Head Office
7338 Fallon Dr
Granton, ON N0M 1V0
Canada

Website Email

Products and Services

In 1991 – after beef farming all of their lives – Paul & Linda Wallis and Charles & Beth O’Shea decided to try something different. They had recently been introduced to the safety and many other convenient features of a new method of heating and sensed an untapped market in Eastern Canada.

After selling a few Outdoor Wood Furnaces for a small local company, then manufacturing their own furnaces for a couple of years, Green Valley Heating quickly learned that building a durable, long lasting Outdoor Furnace was not an easy task.

A hastily prepared road trip and a fortunate turn of events, found Paul and Charles at HEATMOR’S doorstep one early July morning in 1995. They met the staff, viewed the facilities and were impressed with the whole atmosphere of the company. If Green Valley was to stay in the Outdoor Furnace business, their manufacturer of choice was HEATMOR Inc.

Since their beginning in 1991, Green Valley Heating has developed a dealer network in Canada from Manitoba to Newfoundland. Green Valley and their dealer network are proud to have made HEATMOR, Canada’s #1 Selling Stainless Steel Outdoor Furnace.

For twenty years, both families were totally committed to the success of Green Valley Heating, as the Central & Eastern Canadian Distributors of HEATMOR Stainless Steel Outdoor Furnaces. In the summer of 2011 Charlie & Beth decided to retire and Paul & Linda became the sole owner’s of Green Valley Heating. Together with their team, they continue their commitment to Green Valley’s success by offering superior products and outstanding customer service.

Adding new products such as Anthracite coal and Keystoker coal burning appliances along with existing items like Logstor flexible insulated pipe and a long list of plumbing & heating parts has made Green Valley Heating a one stop shop for hydronic heating supplies and accessories.

In 2016 Green Valley Heating celebrated 25 years in business. They continue to look forward to many more years of working with Heatmor – “an honest company manufacturing a quality product.”

HEATMOR™ OUTDOOR FURNACES

COST EFFECTIVE, VERSATILE HEATING
You’ll realize big savings with your HEATMOR™ furnace, which is designed to work as easily with existing heating systems as with new construction. The more heating needs you have, the greater the savings, because a HEATMOR™ system can add warmth to your life inside and out.

EASY TO OPERATE
Your HEATMOR™ furnace operates on a simple principle; burning wood in the furnace heats water that is pumped underground to your home and/or other buildings. Therefore, it can be connected to your hot water heater, furnace, or heat exchanger to provide steady, comfortable, and efficient heating.

GARAGE
Heat your garage with a unit heater or an in-floor hydronic system or a combination of the two. The advantage of the in-floor heating system is that you will have a dry, warm floor. Think of the comfort of working on a warm floor and the ease of thawing out frozen vehicles. Not to mention that wet slippery floors will dry very quickly.

POOL OR SPA
Since the HEATMOR™ uses a forced draft air induction system it is ideal for use in the summer for low heat load uses such as a pool or spa. Simply install a water to water heat exchanger to the pool or spa circulation/filtration system and an aqaustat to monitor the water temperature and you will have constant, even water temperature.

GREENHOUSE
For this application, a combination of unit heaters and hydronic in-floor heat are installed. This combination will keep the air as well as the soil at a constant temperature. The air and soil temperatures are individually monitored and maintained for optimum growing conditions.

HOME
Forced Air Heating
If you presently heat with a Forced Air System, you would install a water-to-air heat exchanger in the duct work directly above your existing furnace. Hot water constantly circulates through the exchanger. The blower, controlled by a thermostat, blows air across the heat exchanger coil and transfers the heat through the house. A more even heat is provided with this system. Your existing furnace can stay in place as back-up.

Radiant Floor Heating
To install an Radiant Floor heating system, hot water pipes are placed in the floor at the time the slab is poured, water circulates through the tubing and heats the concrete, which radiates and heats the building. Valves are used to control water flow in each loop – manual control valves are used between manifolds for temperature control, and electric zone valves are used for more even heat. Thermostats are used to individually control the heat in any part of the building.

Hot Water Baseboard
For a Hot Water Baseboard system, the baseboards (resembling electric baseboard heaters) are installed around the perimeter of the building. Individual room temperature is con-trolled by zone valves and thermostats.

Existing Boiler System
The Heatmor can be hooked directly into an existing boiler. A constant flow of hot water is maintained through the use of a circulating pump. The zone valves, existing pump, and baseboard radiation transfer the heat through the house. The old system can then remain as back-up.

DOMESTIC HOT WATER
Domestic Coil
The domestic coil provides a method of heating water indirectly through water-to-water convection. This method of heating needs to be planned from the initial stages of purchasing your Heatmor™ Stainless Steel Outdoor Furnace. By ordering a domestic coil when purchasing your furnace, the unit will be specially manufactured with a hole at the back of the furnace to accommodate it.

Spiral Side-Arm
The Side-Arm would be located inside your home mounted externally to your existing hot water heater. Through thermo-siphoning, you will be provided adequate hot water for your needs. This option can be added at any time by speaking to your local Authorized Heatmor™ Dealer.

WORKSHOP OR FARMSHOP
Heat your farm shop or workshop with a unit heater or an in-floor hydronic system or a combination of the two. The advantage of the in-floor heating system is that you will have a dry, warm floor. Think of the comfort of working on a warm floor and the ease of thawing out frozen vehicles. Not to mention that wet slippery floors will dry very quickly.

INDUSTRIAL BUILDINGS / CHICKEN OR PIG BARNS / INFLOOR HEATING
Heat your barn with a unit heater or an in-floor hydronic system or a combination of the two. The advantage of the in-floor heating system is that you will have a dry, warm floor.

LOGSTOR INSULATED FLEXIBLE PIPE
PRE-INSULATED FLEXIBLE PIPE FOR OUTDOOR HYDRONIC HEATING SYSTEMS

• The low thermal conductivity of polyurethane foam delivers very high insulating performance, saving you fuel and furnace loading time – this also allows for a smaller overall jacket size relative to other insulating materials.

• The entire system is made of plastic; there is nothing to corrode over time.

• The PEX-Flex carrier pipe is made of cross linked polyethylene (PEX) with EVOH coating which prevents oxygen from penetrating the pipe wall and entering the heating system.

• PEX-Flex is “bonded” and “self-compensating” with respect to expansion an contraction… meaning the carrier pipe(s), insulation and jacket are mechanically linked to one another and move collectively.

• All PEX-Flex pipe systems come equipped with a “smart” membrane (diffusion barrier) between the outer casing and the insulation. This leak proof diffusion barrier prevents (cyclopentane) gas in the foam from escaping through the jacket and being replaced by atmospheric air with reduced insulating properties – a process called ageing. This keeps the operating performance high throughout out the service life of the pipe.

• The pipe installs quickly and easily without solvent welding, special tools or heavy equipment resulting in lower installed cost when compared to other insulating methods.

• No drainage tile, sand/gravel fill or deep/wide trench required. PEX-Flex can be shallow buried even in high water table areas.

• Flexibility of coiled PEX-Flex often eliminates the need for joints, elbows and fittings – plus custom ‘cut-to-length’ sections eliminate waste.

• Lasts indefinitely – paying for itself many times over.